Software Updates

autocad_mep_suite_2009_update2_win_32bit.exe

autocad_mep_suite_2009_update2_win_64bit.exe

The following defects have been fixed in AutoCAD MEP 2009 Update 2

Duct

• Duct Sizing should more accurately produce the correct size in metric units.

Electrical

• The Load property on Devices will now schedule the loads of each phase instead of only phase 1.
• Object Snaps on scaled Devices will now behave more consistently.
• Devices which contain annotation will produce an image in the Property Palette which matches the image in the Select a Style dialog

Pipe

• Using grips to modify a Pipe layout during a Reference Edit session no longer causes disconnections in the pipe layout.
• AutoLayout should not produce overlapping pipe segments when connection two existing pipes to each other.

Tool Palettes

• Multi-view Part tools will respect Part Size Name when executed.

Miscellaneous

• Invalid Enum Map String message is no longer encountered when using the MvPartModify command on a multi-view part which does not exist in the active catalog.

The following defects were fixed with AutoCAD MEP 2009 Update 1 and are also fixed in AutoCAD MEP 2009 Update 2:

Catalog editor

• Unable to Write Check Permissions error occurs when copy and paste parts into the same catalog.

Duct

• Duct sizing does not always provide the expected size when using Metric units

Electrical

• Power Totals tool does not always state the correct load.

Pipe

• Pipe segments will be offset from each other when using justification which is not Center/Center.
• Insulation will not be applied to pipe fittings when using the match properties.
• In some instances pipe object are not visible until a regenerate is performed.

MvPart

• Invalid Enum Map String error when using MvPartModify on a multi-view part created via MvPartConvert command.

System

• AutoCAD warning message when saving an External Reference.

General Updates to AutoCAD Architecture

The following defects have been fixed in AutoCAD Architecture 2009 Update 2

Annotation scaling

• Multi-view blocks inserted from user created tools did not scale properly when used in subsequent drawings or sessions.

Drawing management

• Projects created from project templates did not inherit the correct sheet storage location property.
• Projects created from project templates did not inherit sheet subset storage location information.
• The application would occasionally crash when creating project details.

GBXML

• Surfaces belonging to different walls would export with the same CadObjectId.

IFC

• Spaces, railings, footings, and column objects might be exported with an incorrect object type identifier in some localized releases.
• Half spaces would be imported as large modifiers.
• Slab fascias and soffits would not properly export in some localized releases.
• Level and elevation info would be created in reverse order when an IFC file was imported into a project.
• Material sets applied to walls of type "Shared" would not export correctly.

Schedules

• The schedule quantity column evaluated property values without first applying the property data format.

Wall objects and opening endcaps

• Certain endcap configurations might cause walls to disappear in 3d isometric views.
• Some walls might not draw completely at a locked z elevation.
• Using "Add selected" for anchored doors, openings, and windows could cause an application crash in some circumstances.
• Walls might fail to clean up properly across xrefs if the host drawing used different drawing units than the xref.

Miscellaneous

• Tooltips would appear for AutoCAD entities even when ROLLOVERTIPS was set to zero.
• Saving a drawing to the 2004 file format would take an exccessive amount of time.
• Export to AutoCAD might cause an application crash in some circumstances.

The following defects were fixed with AutoCAD Architecture 2009 Update 2:

AModeler

• The application might crash when cutting or refreshing sections or elevations containing certain structural members.

Drawing Management

• For localized versions of AutoCAD Architecture, callouts and labels would occasionally fail to resolve when dropping views.
• The application might crash when viewing the external references of a project drawing that was resaved as a different project drawing type.
• It was not possible to drag a project entity from one file to another when hardware acceleration was enabled, if the host drawing did not use the 2d wireframe visual style.
• The application might crash when plotting immediately after cancelling a previous plot job.

IFC

• Fillet radii would not be imported reliably for certain parameteric profiles.
• Parametric profiles without voids would not be imported reliably.
• Spaces with clipping and holes would not import reliably.
• Wall styles would not be reliably converted and mapped on import.
• Curtain walls might not be import properly on localized versions of AutoCAD Architecture.

GBXML

• gbXMLspan would export a value 1000 times too large for AirChangesPerHour in metric drawings.

OMF

• The application would occasionally crash on shutdown.

Wall Objects

• The face of a wall might not draw correctly in isometric view for certain endcap configurations.

Display System

• Autodesk Civil 3D users could end up with a style referencing a non-existent hatch.

Miscellaneous

• Memory would not be released to Windows when closing a drawing.

General Updates to AutoCAD

The following defects have also been fixed:

3D Navigation Tools

• When you use the ViewCube in some drawings, AutoCAD freezes.
  .NET API
• If you create a wipeout object through .NET API, a fatal error may occur.

Annotation Scaling

• The scale of annotative text changes when you use LISP entmod() to change the properties of the annotative text.

Attributes

• When a drawing contains xrefs, the -ATTEDIT command fails.

Autodesk Buzzsaw

• In the File Navigation dialog box, when you use the Add a Buzzsaw location shortcut option, AutoCAD crashes.

Blocks

• When you copy and paste a dynamic block, associative hatches do not work.
• After you redefine a block definition, associative hatches in dynamic blocks display incorrectly.
• When you open a drawing, a polyline in a block may have a very large width.
• After you open a drawing, some dynamic blocks lose their dynamic properties.

Data Extraction

• Data Extraction cannot finish operations in some cases.
• The Data Extraction Combine Record Mode > Sum values option does not work correctly.

DGN Support

• When you import some DGN files, AutoCAD crashes.

DIM

• If alternate units is on and you edit dimension text, the alternate units text is duplicated.

Export a Layout to Model Space

• If .NET 3.5 Service Pack 1 is installed and you use the EXPORTLAYOUT command on some layouts, AutoCAD may stop responding.

External Reference ESW

• The FIND command performs slowly when you search for text.

Groups

• Rollover highlighting does not go away.

Hatch

• When you bind a drawing with an xref that contains annotative hatches, AutoCAD crashes.

Hide/Shade

• When you use the HIDE command with a drawing that contains text, some objects may not be hidden.

Image

• When you attach a corrupted raster image to a drawing, AutoCAD crashes.

Layer

• When you zoom to a locked viewport, the Layer palette updates

Layouts

• When you attempt to switch layouts in drawings, an Out of Memory crash may occur.

Materials

• When you import a 3DS file with texture, AutoCAD may crash.

Menu Browser

• Some menu macros do not work.

Multileader (mleader)

• Mleader custom arrowheads are not brought over to the drawing from the Tool palette.

Multiline Text (mtext)

• When you edit mtext in a viewport, it may be duplicated in other viewports.

Open/Save

• Osnaps on polylines and mesh objects do not work correctly.

Plot

• When you plot upside-down, an OLE object does not plot correctly.
• A drawing that contains hatches and gradients may plot slowly.
• When plot area is set to View, AutoCAD LT may crash.

Publish

• When you attempt to publish multiple sheets with PUBLISHCOLLATE=1, only the first sheet of the set is plotted.

Quick Properties

• When you edit multiple mtext objects through the Quick Properties palette, AutoCAD crashes.

RECOVER

• When you render some drawings, AutoCAD runs out of memory.

Ribbon

• If the ribbon is displayed and you select portions of a mtext object that contains multiple formats, the mtext object becomes distorted.

Selection

• When you select objects in groups, AutoCAD may crash.

Tables

• When you edit text with space before or after the text within a table cell, AutoCAD crashes.

Text

• When you move text to a new position within a drawing, it disappears.

Tool Palette

• When you attempt to edit the properties of multiple Tool Palette tools, an Out of Memory crash may occur.

Known Issues with This Update

• After installing this update you may receive a "Error Code: 3010" message incorrectly claiming that the update failed. You can verify this by viewing installed updates through the Windows control panel.
• After you apply this update, you may experience the following ribbon customization-related problems:

An Incorrect or Missing Ribbon Tab

• Known Issue: When you display a ribbon tab from a partial or Enterprise CUI file, on the ribbon, the ribbon tab displays incorrectly or is missing.
• Workaround: To correctly display a ribbon tab, recreate the workspace used to display the ribbon tab from scratch. Do not duplicate or attempt to update the workspace. Once you create a new workspace, set the workspace current. The ribbon tab should display correctly.
• For a partial CUI file, before you add a ribbon tab to a workspace, use the Customize User Interface (CUI) Editor to change the customization group name of the file. The customization group name is represented by the uppermost node of the tree in the Customization In pane.

A Blank Image for a Command

• Known Issue: On a ribbon panel, the image associated with a command defined in the Command List pane displays as a blank icon.
• Workaround: To recreate a ribbon command item on a ribbon panel, delete it. Then, from the Command List pane, add the command to the ribbon panel.

Autodesk finally released a hotfix to improve the performance of saving to 2007 DWG format when running in a WAN Acceleration environment. The problem was an Autodesk problem, and not anything related to any particular Wan Accelerator as some people have thought. This is a Hotfix posted by Autodesk that you can also view from the following links...

2009 Wan Acceleration Hotfix link
2008 Wan Acceleration Hotfix link
2007 Wan Acceleration Hotfix link

Description of Problem
WAN acceleration technology typically relies on data-deduplication as a significant part of accelerating data transfer. The 2007 DWG format is written to disk with a type of error-checking that has the side-effect of nearly every byte of the file changing during full-save, even if little was changed. WAN accelerators fail to deduplicate the 2007 DWG data and must transfer nearly all bytes in the 2007 DWG file. This results in a slow-down during full-save when working over a slow WAN.

This hotfix will make a small change in the way the 2007 format DWG files are written to disk such that WAN acceleration hardware will be better able to deduplicate the 2007 DWG data; this will provide some performance gains for SAVE operations when users are saving across a WAN acceleration environment. The resulting 2007 DWG file will be readable whether or not others have this hotfix, but to achieve the best performance everyone working on the same DWG should install this hotfix.

After intalling the hotfix, you must set the Windows environment variable, ACADCOMPRESSIONMODE to 1 for it to have effect.

Note: For AutoCAD, you can often get performance gains in QSAVE operations by setting the ISAVEPERCENT system variable to 100. Using a value of 100 will maximize the chance that a QSAVE operation will use incremental-save rather than full-save. (WAN accelerator technology is able to show good performance in deduplication of 2007 DWG format files when incremental save takes place.)

Applicable Products
AutoCAD 2009
AutoCAD LT 2009
AutoCAD Architecture 2009
AutoCAD Civil 3D 2009
AutoCAD Electrical 2009
AutoCAD Land Desktop 2009
AutoCAD Map3D 2009
AutoCAD Mechanical 2009
AutoCAD MEP 2009
AutoCAD P&ID 2009
AutoCAD Raster Design 2009
AutoCAD Revit Architecture Suite 2009 (1)
AutoCAD Revit MEP Suite 2009 (2)
AutoCAD Revit Structure Suite 2009 (1)
Autodesk Inventor™ Professional 2009 (3)
Autodesk Inventor Suite 2009 (3)

(1) Apply this hotfix only if the installation includes AutoCAD 2009.
(2) Apply this hotfix only if the installation includes AutoCAD MEP 2009.
(3) Apply this hotfix only if the installation includes AutoCAD Mechanical 2009 or AutoCAD Mechanical Desktop® 2009.

Installation Instructions

To Install the WAN Acceleration Hotfix
You must have administrative privileges on your Microsoft® Windows® operating system to complete the installation process.

This installation requires you to replace the following files:

• acdb17.dll
• AcSignCore16.dll

After you replace these files, you must restart your system in order for this hotfix to take effect.

NOTE: Only apply this hotfix after you have installed an AutoCAD 2009-based product. This installation requires you to modify an installed product, which may cause Windows security warnings to display. For all Windows security warnings that display during installation, click Continue.

To Replace the acdb17.dll File

1. Close all software applications.
2. Navigate to your product installation folder; for example C:\Program Files\AutoCAD 2009.
3. In the product installation folder, right-click the acdb17.dll file and select Properties.
4. Click the Version tab and confirm the file version.
5. If the file version is 17.2.56.0, 17.2.111.0, or 17.2.112.0, proceed with this installation.
6. If the file version is greater than 17.2.112.1, do not install this hotfix.
7. Rename the affected original file.
8. In the product installation folder, right-click the acdb17.dll file and rename it acdb17.bak.
9. Based on the product you have installed and its version of the acdb17.dll file, double click the appropriate file.
10. For AutoCAD 2009-based products with the acdb17.dll file version 17.2.56.0
11. Based on the version of your product, double-click WAN_Accelerator_Hotfix_2009_32bit.zip or WAN_Accelerator_Hotfix_2009_64bit.zip.
12. For AutoCAD 2009 Update 1 with the acdb17.dll file version 17.2.111.0 or 17.2.112.0
13. Based on the version of your product, double-click WAN_Accelerator_Hotfix_2009_Update_1_32bit.zip or WAN_Accelerator_Hotfix_2009_Update_1_64bit.zip.
14. Extract acdb17.dll file to the product installation folder; for example C:\Program Files\AutoCAD 2009. NOTE: Keep the zip file that you used in step 6 open. Without opening other software applications, immediately proceed to the procedure below .

To Replace the AcSignCore16.dll File

1. Navigate to your Autodesk Shared folder; for example: C:\Program Files\Common Files\Autodesk Shared.
2. In Autodesk Shared folder, right-click the AcSignCore16.dll file and select Properties.
3. Click the Version tab and confirm the file version.
4. If the file version is 17.2.56.0 proceed with this installation.
5. If the file version is greater than 17.2.112.1, do not install this hotfix.
6. Rename the affected original file
7. In the Autodesk Shared folder, right click the AcSignCore16.dll file and rename it AcSignCore16.bak.
8. Double-click the zip file you used when you replaced the acdb17.dll file. See To Replace the acdb17.dll File, Step 6.
9. Extract the AcSignCore16.dll file to the Autodesk Shared folder; for example: C:\Program Files\Common Files\Autodesk Shared.
10. Restart your system.

To set the ACADCOMPRESSIONMODE environment variable

On Windows XP

1. Right-click My Computer, and then click Properties.
2. Click the Advanced tab.
3. Click Environment variables.
4. Click New to add a new system variable name and value.
5. Set the Variable name to ACADCOMPRESSIONMODE
6. Set the Variable value to 1
7. Click OK until you return to the desktop

On Windows Vista

1. Right-click My Computer, and then click Properties.
2. Right-click My Computer, and then click Properties.
3. Click the Advanced system settings link.
4. Click Environment variables.
5. Click New to add a new system variable name and value.
6. Set the Variable name to ACADCOMPRESSIONMODE
7. Set the Variable value to 1
8. Click OK until you return to the desktop

To Uninstall the WAN Acceleration Hotfix

1. In the product installation folder
2. Delete the acdb17. dll file that you downloaded.
3. Restore the file you renamed to the original name. See To Replace the acdb17.dll File, Step 5.
4. In the Autodesk Shared folder
5. Rename the AcSignCore16.dll file to AcSignCore16.dll.hotfix.
6. Restore the file you renamed to the original name. See To Replace the AcSignCore16.dll File, Step 4.
7. Restart your system.

For more information about this issue, I have previous posts around it
WAN war breaks out over changed file formats in AutoCAD MEP
Reduced write performance for Riverbed WAN links when working with AutoCAD MEP 2007 DWG files
WAN Accelerators Part II